CAUTION
Jack stand must be capable of supporting a minimum
of 2268 kg (5000 lb.).
6.
Place a jack under the leg jack point (A) and raise the
drive wheel slightly off the jack stand.
7.
Remove the jack stand from under the cylinder lift
mount (B) and lower the drive wheel to the ground.
8.
Remove the jack.
Figure 3.33: Drive Wheel Leg Jacking Point
9.
After one hour of operation, retorque the wheel nuts.
Then check every hour until two consecutive checks
produce no movement of the nuts.
147611
22
Revision B
Summary of Contents for M205
