MacDon M205 2010, Operator'S Manual

Page: 75 / 221

WINDROWER OPERATION
Form 169469/169470/169471
73
Revision C
g. Remove pins (D) from lower end of lift linkages.
NOTE
Pins (D) are also used to secure weight
box to windrower linkage.
h. Release the safety lock on the header lift
cylinders.
i. Start engine and lower header down onto the
transport wheels.
j. Pull up on center-link latch (E) and locate latch
into notch (F) on top of hook.
k. Use the HEADER TILT switches to release load
on the cylinder if necessary.
l. Raise the center-link off the header using the
REEL UP switch on the GSL.
m. Slowly back windrower away from header, shut
off engine and remove key from ignition.
n. Attach header transport hitch to header as
follows:
1. Position end (G) of the aft section onto front
wheel hook (H).
2. Push down until latch (J) captures the end
(G).
3. Secure latch (J) with clevis pin (K).
(continued next page)
D
AFT SECTION
FORWARD SECTION
G
G
J
K
H
D60 SHOWN
E
F
HEADER TILT UP
HEADER
TILT DOWN
REEL UP
REEL DOWN