PRE-DELIVERY INSPECTION
Form # 169007
Model Year - 2009
23
F. DRAPER TENSION
The drapers are tensioned after installation at
the factory so should not require adjustment.
Draper tension should be just enough to
prevent slipping and keep draper from sagging
below cutterbar.
a. Raise header, and shut down engine. Engage
header lift props.
WARNING
Stop windrower engine and remove key
before making adjustments to machine. A
child or even a pet could engage the drive.
CAUTION
Engage header lift cylinder stops before
working under header.
b. The white bar should be about halfway in the
window.
c. If required, set draper tension as follows:
1. Turn bolt (B) clockwise (tighten) and white
indicator bar (A) will move inboard in
direction of arrow to indicate that draper is
tightening.
2. Turn bolt (B) counterclockwise (loosen) and
white indicator bar (A) will move outboard in
direction of arrow to indicate that draper is
loosening.
3. Adjust until bar is about halfway in window.
B
A
TIGHTEN
LOOSEN
