PRE-DELIVERY INSPECTION
Form # 169007
Model Year - 2009
22
Double V-Belts – LH Side Only
a. A force of 12 lbf (53 N) should deflect V-belts
(J) 1/8 in. (3 mm) at mid-span.
b. Only if necessary, adjust tension as follows:
1. Loosen two bolts (K) on sickle drive
mounting bracket.
2. Loosen two bolts (L) on end sheet.
3. Turn adjuster bolt (M) to move drive motor
until a force of 12 lbf (53 N) deflects V-belts
(J) 1/8 in. (3 mm) at mid-span.
4. Tighten bolts (K) and (L).
c. Replace end shield.
E. REEL CENTERING
WARNING
Stop windrower engine and remove key
before making adjustments to machine. A
child or even a pet could engage the drive.
a. Measure clearance between reels and both end
sheets. The clearances should be the same if
the reels are centered.
b. If required center the reels as follows:
1. Loosen bolt (A) on each brace (B) located
at each end of the reel.
2. Move forward end of reel support arm (C)
laterally as required to center reel.
3. Tighten bolts (A) and torque to 265 ft-lbf
(359 N
∙
m).
A
B
C
D50
B
C
A
D60
M
K
J
LH SIDE ONLY
L
