UNLOADING AND ASSEMBLY
Form # 169007
Model Year - 2009
18
e. Install endshields with lip in relation to reel
rotation. Use 3/8”x0.5 lg. torx head screws and
torque to 20 ft-lbf (27 N
∙
m).
See photos for
hardware orientation.
The jam nuts must be
locking jam nuts. If they aren’t locking nuts, use
Loctite.
f. Re-tighten endshield support bolts if necessary.
STEP 9. RE-INSTALL GUARDS
a. Retrieve parts bag from cutterbar.
b. Position guards and poly wear plates (if
applicable) on cutterbar and install 7/16”x1.5 lg.
carriage bolts.
NOTE
Poly wear plates should
be installed with special
bolts as shown.
c. Locate hold-downs on cutterbar as shown and
secure with nuts. Adjuster bolt should not
require adjusting.
d. Tighten nuts to 50 ft-lbf (68 N
∙
m).
DIRECTION
OF ROTATION
TAIL END
DIRECTION
OF ROTATION
CAM END
