3.11
Installing Forming Shield – SP Windrower Headers
1.
Remove header from the windrower (if attached)
for ease of installing the forming shield.
Refer to
windrower operator’s manual for procedure.
NOTE:
Do
NOT
install the two triangular shaped plates.
Triangular plates used with rotary headers.
Figure 3.30: Triangular Plate
2.
Install bolt (A) with spacer (B) and nut on each leg
in the upper hole. Hardware is supplied with forming
shield kit.
Figure 3.31: Windrower Leg
3.
Remove two clevis pins (A) from forward end of
forming shield.
Figure 3.32: Forming Shield
147913
22
Revision A
Summary of Contents for A40-D
Page 2: ...A40 D Self Propelled Windrower Auger Header Published May 2016 ...
Page 76: ......
Page 100: ......
Page 119: ......
