mabe Centauro ICL2040 Series, Service Manual

Page: 117 / 138

45 | Manual de Servicio
Ingenieria de Servicio
The switch / fuse is off /
blown Check the household switches / fuses. Replace the fuses or
reset the circuit breaker. The washing machine should have an
individual outlet
The electronic part must be
reset Unplug washer, wait 2 minutes, reconnect, and press START
START was not
held down Press START
Lid magnet missing Call for service
Movement inside the
washing
machine
when turned off
The shift mechanism is
disengaging to return to its
initial position (only in spin) When the washer is turned off manually, the shifter will
disengage from the motor before it shuts off completely (spin
only). If the cover is lifted before the motor is switched off,
operation will be restart when lid is closed (fill and wash only)
Led turns the
washing machine on
and off during the
Agitation
This can happen in large
loads This can happen when you have large loads and the system
detects a severe jam, press the start / pause button 4 to 5 times,
if the problem persists call the service area
PERFORMANCE
(WASHER) POSSIBLE CAUSES WHAT TO DO
Clothes too wet Incorrect spin cycle selected Make sure the selected spin cycle matches the amount you are
washing. Some fabrics will feel wetter when rinsed in cold water
Colorful spots
Incorrect use of fabric
softener cloth See the instructions on the fabric softener package and follow
the directions on using the dispenser. Pre-treat stains and
rewash
Color transfer Separate white or light clothes from dark colored ones.
Gray or yellowish
garments
Insufficient amount of
detergent
Use more detergent (especially with larger loads). Be sure to
follow the manufacturer's instructions on using the detergent
Heavy water Use a water conditioner such as Calgon brand or install a water
softener
The water is not hot enough Make sure the water heater supplies water at a temperature of
48 ° C to 60 ° C (120 ° F to 140 ° F)
The washing machine is
overloaded Select the load size to match the load of the clothes
Detergent is not dissolving Add detergent as the wash basket fills with water before loading
laundry
Color transfer Sort the clothes by color. If the fabric label indicates that it
should be washed separately, the unstable colors may be
indicated
Color transfer Sort the clothes by color. If the fabric tag indicates that it should
be washed separately, unstable colors may be indicated
Lint or residue
in the clothes
Clothes are dried in the air or
on the clothesline If you don't dry your clothes with a clothes dryer, the clothes
may retain more lint
Wrong order Separate lint producers from lint collectors
Washing too long Wash small amounts for a shorter time than larger loads
Detergent does not dissolve Add detergent as the wash basket fills with water, before
loading laundry. Try using a liquid detergent. Use a warmer
water temperature
Overload Do not overload laundry so that it does not exceed the upper
line of holes in the washer basket
Incorrect use of fabric
softener Check the instructions on the fabric softener package and
follow the instructions to use the dispenser
Ball formation Result of normal wear and
tear on cotton-polyester
blends and lint-free fabrics Although this is not caused by the washing machine, you can
reduce the balling process by washing clothes by turning them
inside out
Hitches, holes,
tears,
rips, or
excessive wear
Pins, brooches, hooks,
cutting buttons, bucklesde
belt, zippers, and sharp
objects left in pockets
Adjust snaps, hooks, buttons and closures
Remove loose items such as pins, objects in pockets, and sharp
buttons
Turn over knitted garments (they snag easily)