14
Hakki Pilke 38 Easy
Original
Version 6
3.2.3.
Adjusting the log length
The Hakki Pilke 38 Easy is equipped with a mechanical log measurement device with an incremented
adjustment value of 25–60 cm.
1.
Turn the machine off, disconnect it from
any power source, and open the
protective cover of the machine.
2.
When the wood limiter is in the splitting
position, set it to the desired length by
removing the cotter pin B in the limiter's
locking pin and by pulling out the locking
pin A. Lock the limiter plate C in the
desired position. Re-insert the locking
pin A and the cotter pin B.
Note! If necessary, turn the limiter plate
to the correct position according to the
thickness of the log. (See Figures 17 and
18).
Figure 17. Limiter plate position for large logs of
more than 25 cm in diameter.
Figure 16. Log length adjustment
Figure 18. Limter plate position for small logs
