11
Hakki Pilke 38 Easy
Original
Version 6
Place the output conveyor in the transport position as follows:
1.
Turn off the machine.
2.
Release lock D that holds the upper section of the conveyor in place, and lower the conveyor to the
lowest possible position with the winch.
3.
Position support bar B over the belt, and fold the upper section of the conveyor onto the lower section
with handle C.
4.
Turn the conveyor to the middle position. See Section 3.2.4.
5.
Turn the splitting groove guard E into transport position, as shown in Figure 9.
6.
Lift the conveyor with the winch until it locks into the raised position. Ensure that lock A connects
firmly.
3.2.
Controls
Figure 10. The control of the machine
