49
Original
Version 1-2011
a single hydraulic circuit. If necessary, the pressure can be adjusted as follows: loosen the locking nut A
and turn the hex socket screw B clockwise/anti-clockwise. The pressure increases when turning the screw
clockwise and vice versa.
Note! The design value is 40 bars. This limit must not be exceeded!
Figure 48.
In the so-called basic model, the pressure of the input conveyor's motor can be adjusted directly with the
valve that controls the motor. The design value is 180 bar. This limit must not be exceeded. Adjust the
pressure as follows:
1.
Remove
the
adjustment rod
B by detaching
the locking rings
(2 pcs).
2.
Unscrew
the
three bolts A
fastening
the
cover,
and
remove
the
cover.
3.
Use the hex
socket screw C
to adjust the
control
valve
pressure.
