47
Original
Version 1-2011
6.8
Changing the hydraulic oil
1.
Shut down the splitter and
disconnect it from its power
sources.
2.
Open the filler cap C. This
will allow the oil to drain
more easily. The filler cap is
located on the oil tank in the
middle
section
of
the
splitter.
3.
Next, open the drain plug A
located next to the angle
transmission B, and drain the
oil into a suitable container.
4.
Unscrew the bolts D to open
the filter cover, and replace
the old filter with a new one
(CR-50).
5.
Close the drain plug A, and
fill the tank with fresh oil
(approx. 42 litres).
6.
Finally, ensure that the oil
level settles between the
minimum and maximum
limits, E and F.
