12
Original
Version 1-2011
Figure 9
.
Figure 10.
Figure 11. Figure 12.
Install the crank for the conveyor winch (no. 8 in Figure
2) by screwing it into place, and lock it with a nut.
Note! Do not fully tighten the nut. Leave a 3 mm
clearance between the crank and the nut!
Release a sufficient length of the winch strap by rotating
the crank clockwise, and attach the winch hook to the
conveyor.
Ensure that the hook locks into place!
Attach the height adjustment lever for the splitting
blade (no. 7 in Figure 2) as shown in the figure. Install
the spring that holds the lever in its slot on the outside
of the lever, under the head of the bolt.
Place the spring that enables the blade's movement
under the nut. Tighten the nut so that it applies slight
pressure on the spring. Ensure that the spring has
enough play.
Note! Does not apply to Easy models.
Install the guard for the
output conveyor V-belt
(no. 5 in Figure 1) with
three bolts as shown in
the Figure.
Does not
apply to pivoting
conveyors!
Attach the input conveyor's
support (no. 2 Figure 1) to
the input conveyor with a
bolt.
