S W G U s e r G u i d e
75
Chapter 14: Viewing Logs
5. In the
Filter
tab, define filtering criteria as follows:
a. To add a new row, click . If a popup menu appears, select
Add
Filter
.
b. In the
Field
drop‐down list, select the required filter type.
c. In the
Operator
drop‐down list that appears, select the relevant parameter (for example,
Equals). Note that the
Operator
drop‐down list varies according to the selected filter type.
Depending on your selections, the
Value
field displays either a drop‐down list or a blank field.
d. Select or specify a value in the
Value
field to complete your initial filter selection.
e. To define multiple filter criteria:
i. If an
Or
relationship is needed between any of the filters, click
Switch
to
Advanced
Mode
.
ii. Repeat steps
Step a
through
Step d
for each filter. If you are in Advanced mode, be sure to
select the appropriate relationship operators, and add any needed parentheses.
f. To delete a filtering row, click the
icon if it is displayed. Otherwise, right click the
icon
of the row, and choose
Delete
Filter.
6. Click
Save
.
Â
To delete a profile
1. If the Profiles tree is not displayed, display it by selecting
Logs
and
Reports
Æ
Log
Profiles
View
Æ
<logtype>
Profiles
.
2. Right click the profile and choose
Delete
Profile
. Then confirm the deletion.
NOTE:
At
the
bottom
of
the
Filter
tab
is
a
toggle
button
Switch
To
Advanced
Mode
|
Switch
To
Simple
Mode
.
• Simple
Mode,
which
is
the
default
mode,
is
useful
when
you
define
either
a
single
filter,
or
when
you
define
multiple
filters
that
all
have
an
AND
relationship.
This
mode:
• allows
only
AND
relational
operators;
it
does
not
allow
OR
operators.
• does
not
display
parentheses
columns
for
defining
complex
relationships.
• displays
a
Delete
icon
to
the
left
of
the
Filter
definition.
• Advanced
Mode
is
useful
when
you
are
defining
multiple
filters
having
at
least
one
OR
relationship.
This
mode:
• allows
specification
of
AND
and
OR
operators.
• display
parentheses
columns
for
defining
complex
relationships.
The
procedures
for
defining
filters
for
Logs
and
for
Reports
are
very
similar.
NOTE:
A
filter
with
parentheses
cannot
be
switched
back
to
Simple
mode.