S W G U s e r G u i d e
Chapter 3: Defining and Customizing Security Policies
24
Defining Conditions in a Security Policy Rule
Â
To define conditions in a Security Policy Rule
1. In the Policy tree, expand the relevant policy and rule. For instructions on displaying the Policy
tree, see
Step 1
in the procedure
To define a Security Policy in Advanced mode
.
2. Do either of the following:
• To edit an existing condition, click the condition in the tree, and then in the main pane, click
Edit
.
• To add a new condition to a rule, right‐click the rule and choose
Add
Condition
.
The main window displays the Condition Definition screen.
3. In the
Condition
Name
field, select the type of condition in the drop‐down list.
For any selected condition type, the window displays an appropriate checkbox list. For detailed
information on condition types and the particular items in a condition list, see the
Management
Console
Reference
Guide
.
4. If you chose
Malware
Entrapment
Profile
, skip to
Step 8
.
5. If the window displays an
Applies
To
area above the list, select whether the condition will apply
to the items you check or to the items you do not check.
6. Select the appropriate checkboxes in the list. If the window displays a
Select/Deselect
All
checkbox, you can use this if it will be useful.
7. If the condition has any other special fields or requirements to fill in, fill them in appropriately,
skip
Step 8
and then continue with
Step 9
.
8. Perform this step only if you chose
Malware
Entrapment
Profile
as the condition name. The
window displays a Security level setting line. the default setting is
None
. Depending on the policy
type, it might also display an HTML repair checkbox. Do the following:
a. To change the Security level setting, slide the sliding button to the appropriate value for
example,
Basic
or
Strict
.
For information about the level, click the relevant level link (for example,
Medium
). The Secure
Web Gateway Rule Updates window opens. This window allows you access relevant informa‐
tion.
9. Click
Save
.
10. If you are ready to distribute and implement the changes in your system devices, click
.
NOTE:
You
can
also
edit
each
set
of
Condition
Options
via
Policies
Æ
Condition
Settings
.
For
more
information
see
the
Management
Console
Reference
Guide
.