M86 Security SWG, User Manual, Page: 28 / 134

S W G U s e r G u i d e
Chapter 4: Defining and Managing Users 28
Setting Default User Policy Assignments
Â
To change which policies are set as the User defaults
NOTE: You can set default user policies for the following types of policies: Emergency ,
Master , Security , Logging , and HTTPS . Note the following points:
1. Select Policies
Æ
Default Policies Settings .
The Default Policies Settings screen is displayed. This screen lists the types of policies for which
defaults can be set at the site level, and for each type it provides a drop‐down list of all defined poli‐
cies. The currently displayed policy for each type is the current default.
2. In the main window, click Edit .
3. In the Default Policy Values area, set which policy will be the default for the particular policy types.
Do not set a Master Policy unless you intend to implement Master Policy usage.
4. When done, click Save .
5. If you are ready to distribute and implement the changes in your system devices, click .
• Security, Logging and HTTPS policies are automatically apply to all User Groups, LDAP
Groups, and Unknown Users, except where you assign different policies of those types to
specific groups or users.
• HTTPS and HTTPS Emergency policies are relevant only if HTTPS be licensed .
• Master Policy applies to Super Administrators. Most sites do not use this feature or policy.
For information on Super Administrators, see Chapter 18: Defining Administrators .
• Emergency Policies — Emergency, and HTTPS Emergency when licensed apply across the
board. You cannot assign a different Emergency policy to different user groups or users.
IMPORTANT: Ensure that the Enable Emergency Policy checkbox is NOT selected. You
should only select this checkbox in an emergency. Selecting this checkbox implements
Emergency policy that overrides all other Security policies defined for all devices, user
groups, and independent users.