S W G U s e r G u i d e
111
Chapter 19: Performing Additional Configuration Tasks
Â
To define a rule in a Device Logging policy
1. In the Policy tree, expand the policy so that you display its existing rules. For instructions on
displaying the Policy tree, see
Step 1
in the procedure
Defining a Device Logging Policy
.
2. Do any of the following:
• To edit an existing rule, click the rule in the tree, and then in the main pane, click
Edit
.
• To add a rule to a policy that has no rules, or to add a rule to the bottom of the rule list in the
policy, right‐click the policy and choose
Add
Rule
.
• To add a rule directly above an existing rule, right click the existing rule, and select
Insert
Rule
.
The main window displays the Rule Definition screen.
3. Enter a name for the rule.
4. Provide a description of the rule. The description is optional.
5. If the rule has an
Enable
Rule
checkbox, ensure that the checkbox is appropriately selected or
cleared, depending on whether or not the rule should be enabled after being committed.
6. In the
Send
To
area, check the locations to which the device logging data should be sent.
7. Click
Save
.
8. To make triggering of the rule conditional, continue with .
9. To define additional rules in this policy, repeat this procedure.
10. If you are ready to distribute and implement the changes in your system devices, click
.
Â
To define conditions in a Device Logging Rule
1. In the Policy tree, expand the relevant policy and rule. For instructions on displaying the Policy
tree, see
Step 1
in the procedure
To define a Device Logging Policy
.
2. Do either of the following:
• To edit an existing condition, click the condition in the tree, and in the main pane, click
Edit
.
• To add a new condition to a rule:
a. Right‐click the rule and choose
Add
Condition
.
The main window displays the Condition Definition screen.
b. In the
Condition
Name
field
, select the type of condition in the drop‐down list.
For any selected condition type, the window displays an appropriate checkbox list.
For detailed information on condition types and the particular items in a condition list, see the
Management
Console
Reference
Guide
.
3. If the window displays an
Applies
To
area above the list, select whether the condition will apply
to the items you check or to the items you do not check.
4. Select the appropriate checkboxes in the list. If the window displays a
Select/Deselect
All
checkbox, you can use this if it will be useful.
5. If the condition has any other special fields or requirements to fill in, fill them in appropriately.
6. Click
Save
.
