M86 Security MSA, Installation Manual

Page: 37 / 118

I
NSTALL THE
S
ERVER
S
TEP
1A: Q
UICK
S
TART
S
ETUP
P
ROCEDURES
M86 S
ECURITY
I
NSTALLATION
G
UIDE
31
Access the IR Online
A. From the workstation you are using, launch an Internet supported browser such
as:
• Firefox 9 or 10
• Internet Explorer 8 or 9
• Safari 5.0 or 5.1
• Google Chrome 16 or 17
B. Type in https://x.x.x.x:1443 in the address field (in which ‘x.x.x.x’ represents
the LAN 1 IP address assigned to the IR).
C. Click Go to display the security issue page:
• If using Firefox, proceed to Accept the Security Certificate in Firefox.
• If using IE, proceed to Temporarily Accept the Security Certificate in IE.
• If using Safari, proceed to Accept the Security Certificate in Safari.
• If using Google Chrome, proceed to Accept the Security Certificate in
Chrome.
• If the security issue page does not display in your browser, verify the
following:
• The IR is powered on.
• The IR is connected to the same hub as your router/firewall.
• Can the administrator workstation normally connect to the Internet?
• Is the IR plugged into a switch instead of a hub?
• Do you have both LAN ports connected to your network hub?
• Is there a caching server?
• Is the administrator workstation able to ping the IR’s LAN 1 IP address?
• If pinging the IP address of the IR is unsuccessful, try restarting the
network service or rebooting the IR.
• If still unsuccessful, contact an M86 Security solutions engineer or
technical support representative.