M86 Security MSA, Installation Manual

Page: 34 / 118

I
NSTALL THE
S
ERVER
S
TEP
1A: Q
UICK
S
TART
S
ETUP
P
ROCEDURES
28
M86 S
ECURITY
I
NSTALLATION
G
UIDE
Non-Quick Start procedures or settings
The options described below do not pertain to the quick start setup process.
Reboot system
A. From the Quick Start menu, press B to go to the Reboot confirmation screen.
B. At the Really reboot the system? prompt, press Y to continue, or press any
other key to cancel reboot.
Change Quick Start password
A. From the Quick Start menu, press C to go to the Change Administrator Pass-
word screen.
NOTE : This option will change the password used for accessing the Quick Start menu (the
default password being #s3tup#r3k ) but will not change the password used for accessing
the Web Filter login screen. Option D, “Reset Admin account”, should be used for reset-
ting the Web Filter Administrator console username and password to the factory default
‘admin’/’user3’ and for unlocking all IP addresses currently locked.
B. At the Enter the new administrator password prompt, type in the new pass-
word to be used for accessing the Quick Start menu and press Enter .
C. At the Re-enter the new administrator password prompt, re-type the pass-
word you just entered and press Enter , or press Esc to cancel the change.
Reset admin console account
A. From the Quick Start menu, press D to go to the Reset admin GUI account
confirmation screen that displays the following message:
Reset admin account password? Are you sure?
NOTE: This process will also unlock the admin account and unlock all currently
locked IPs.
NOTE : This option resets the Web Filter Administrator console username and password
to the factory default ‘admin’/’user3’ and will unlock all IP addresses currently locked.
B. Press Y to continue, or press any other key to cancel admin account reset.