M86 Security MSA Installation Manual Download

Page: 17 / 118

RELIMINARY

ETUP

ROCEDURES

ACK

OUNT

THE

ERVER

M86 S

ECURITY

NSTALLATION

UIDE

Optional: Install the Open Racks

After you have installed the inner rails on the chassis, you are ready to install the
outer rails of rail assemblies to the rack.

NOTE

: The rails are designed to fit in the racks with the depth of 28” to 33”.

• Determine the placement of each component in the rack before you install the rails.
• Install the heaviest server components on the bottom of the rack first, and then work up.

1. In the package, locate a pair of front (short) and rear (long) brackets. Please

note that the brackets are marked with Up/Front Arrows (front) and Up/Rear
arrows (rear).

2. Secure the front (short) bracket (marked with the Up/Front arrows) to the outer

rail with two Type G screws as shown below.

Summary of Contents for MSA























































































































Search results

Summary of Contents for MSA

Reviews:

Related manuals for MSA

Brands by name

Popular brands

M86 Security MSA, Installation Manual

Search results

Summary of Contents for MSA

Reviews:

Related manuals for MSA

Brands by name

Popular brands