9
SCCFG Users Manual EM-9192 Rev.4
6.3.1 WRITE TO DEVICE WITH DIFFERENT LCD FIRMWARE VERSION
When the LCD firmware version of setting data, which is created by “READ CFG FILE” or “DOWNLOAD TO DEVICE”,
is different from the LCD firmware version of destination device, the data may change to factory setting value depend-
ing on configuration item. Except following configuration items, the data can be handed over even LCD firmware is
different.
• When reading configuration of LCD firmware version 1.3x or 1.4x and writing to the device with LCD firmware version
1.5x or later.
LCD firmware version of read data:
Ver. 1.3x (SC100, SC110, SC200, SC210)
Ver. 1.4x (SC100, SC110, SC200, SC210)
LCD firmware version of destination device:
Ver. 1.5x or later
CONFIGURATION ITEM
DATA
User’s parameter table item
(Range Hi limit, Range Lo limit and Decimal place)
Factory setting
*
PRG mode indicator
Factory setting
*
Numerical key control
Factory setting
*
*
Refer to 6.7 CONFIGURATION ITEM LIST
