6
SCCFG Users Manual EM-9192 Rev.4
4. COMMUNICATION
4.1 COP-IRDA COMMUNICATION ADAPTOR
Use M-System’s Model COP-IRDA or COP-US to communicate with the Controller via infrared rays. Before using
the COP-IRDA, install its driver in your PC. Refer to the instruction manual for the COP-IRDA for more information.
When the driver is installed correctly, the COP-IRDA is assigned to a COM port.
4.2 SETTING ON THE CONTROLLER
Set only one Controller module to infrared communication mode at once when multiple devices line up side by side.
Refer to the users manual for the Controller for more information to operate the Controller to activate the communica-
tion mode.
4.3 COP-US COMMUNICATION ADAPTOR
Use M-System’s Model COP-US to communicate with the Controller with wired communication. Before using the
COP-US, install its driver in your PC. Refer to the instruction manual for the COP-US for more information.
When the driver is installed correctly, the COP-US is assigned to a COM port.
4.4 SETTING ON THE CONTROLLER
Refer to the users manual for the Controller for more information to operate the Controller to activate the communica-
tion mode.
PC
SCCFG
Controller
COP-IRDA
USB port
Infrared port
Max. 0.2 m
PC
SCCFG
Controller
COP-US
USB port
Configurator jack
Connector
adapter
