M-system SC100 Series, User Manual

Page: 13 / 24

13 SCCFG Users Manual EM-9192 Rev.4
For LCD firmware version 1.5x or later (SC100, SC110, SC200, SC210)
SC210 Configuration LCD Ver. 1.5x
Group Item Data
Back light brightness 5
Screen saver (time) 0
min
(0=OFF)
MV 0/100% symbol MV1 100% symbol OP
MV1 0% symbol CL
MV2 100% symbol OP
MV2 0% symbol CL
Loop display (MV/OP) LP1 display (MV) 1
LP2 display (MV) 2
Loop variables PV/SP/MV
Graph scale divisions 10
Decimals (% display) 1
Alarm blinking Enable
Bargraph color PV1 Normal 5
PV1 Hi limit 1
PV1 Lo limit 4
PV2 Normal 5
PV2 Hi limit 1
PV2 Lo limit 4
SP1 Normal 8
SP2 Normal 8
MV1 Normal 13
MV1 Hi limit 12
MV1 Lo limit 14
MV2 Normal 13
MV2 Hi limit 12
MV2 Lo limit 14
Digital display color PV1 16
PV2 16
SP1 16
SP2 16
MV1 16
MV2 16
FN1 16
FN2 16
FN3 16
FN4 16
Trend recording Start
Storing interval 10 sec
Trend channel LP1 CH1 PV1
LP1 CH2 SP1
LP1 CH3 MV1
LP1 CH4 None
LP2 CH1 PV2
LP2 CH2 SP2
LP2 CH3 MV2
LP2 CH4 None
Trend graph color LP1 CH1 1
LP1 CH2 4
LP1 CH3 5
LP1 CH4 8
LP2 CH1 1
LP2 CH2 4
LP2 CH3 5
LP2 CH4 8
Selected loop color 7
Touch tone Enable
Home Registered view Digital
Registered loop number 1
Select operation view Digital Enable
Bargraph Enable
Dual-loop bargraph Enable
Short trend Enable
User’s parameter
table
Enable
Select unit mode Digital Selectable
Bargraph Selectable
Items under Bargraph color and Digital
display color, and Data under Trend
channel depends upon Loop variables
setting.