M-system PU-2A, Operation Manual

Page: 13 / 40

13 PU-2A USERS MANUAL EM-9255-C Rev.14
■
FREQUENCY INPUT model xJPA (Group 01)
ITEM MDFY. DATA INPUT DISPLAY CONTENTS
01 S MAINTENANCE SWITCH (lock command)
0 MTSW: MON.MODE MONITOR mode: data monitoring only
1 MTSW: PRG.MODE PROGRAM mode: “P” marked data modifiable
02 P Alphabets & No. TG: XXXXXXXXXX Tag name entry (10 characters max.)
03
05
06 P
D
D
Number (%)
No input
No input
OUTPER XXX.XX
INPPER XXX.XX
INPFRQ XXXXXX Output status monitor (%) & simulation output
Input status monitor (%) *
1
Input frequency monitor, same unit as selected in ITEM 11
10 P LINEARIZATION
1 PA-1: straight Without
2 PA-2: curved With (ITEM 60 to 91 for data input) *
2
11 P COARSE FREQUENCY RANGE SELECTION
0
1
2
FRQRNG: 10mHz
FRQRNG: 100mHz
FRQRNG: 1.0Hz 0 – 10 mHz
0 – 100 mHz
0 – 1 Hz
3
4
5 FRQRNG: 10Hz
FRQRNG: 100Hz
FRQRNG: 1.0kHz 0 – 10 Hz
0 – 100 Hz
0 – 1 kHz
6
7
FRQRNG: 10kHz
FRQRNG: 100kHz 0 – 10 kHz
0 – 100 kHz
13 P Percentage DRPOUT XXX.XX Low-end cutout adjustment, 0.00 – 100.00%
14
15 P
P Actual value
Actual value SCLLOW XXXXXX
SCLHIG XXXXXX Input range scaling 0% value
Input range scaling 100% value
Up to 150% of the coarse range selected in ITEM 11. Use the same
unit.
18 P Number SMPLRATE XXX Sampling rate modification for irregular pulse input (No. of pulses
to be counted during one rotation of input flowmeter)
Frequency range ≤ 100 Hz: 1 – 255
Frequency range 0 – 1 kHz: 1 – 25
Frequency range 0 – 10 kHz: 1 – 2
19 P Percentage FINZER Fine zero adjustment
Initial status shows actual bias (%). When data is entered, output
(%) is shown.
20 P Percentage FINSPN Fine span adjustment
Initial status shows actual gain (%). When data is entered, output
(%) is shown.
REMARK 1 : Percentage of the coarse input range selected in ITEM 11.
(Example) SCALED RANGE COARSE RANGE INPUT DISPLAY
10 – 100 Hz 0 – 100 Hz 10 Hz 10%
REMARK 2 : See LINEARIZER model xJFX table for detailed explanation on curve data programming (ITEM 60 to 91).