M-system PU-2A, Operation Manual

Page: 12 / 40

12 PU-2A USERS MANUAL EM-9255-C Rev.14
■
3-wire RTD INPUT model xJR (Group 01)
ITEM MDFY. DATA INPUT DISPLAY CONTENTS
01 S MAINTENANCE SWITCH (lock command)
0 MTSW: MON.MODE MONITOR mode: data monitoring only
1 MTSW: PRG.MODE PROGRAM mode: “P” marked data modifiable
02 P Alphabets & No. TG: XXXXXXXXXX Tag name entry (10 characters max.)
03
04 P
D
Number (%)
No input
OUTPER XXX.XX
OUTTMP XXXXXX Output status monitor (%) & simulation output
Output temperature monitor *
1
06 D No input INPVAL XXXXXX Input status monitor in Ω.
10 TYPE OF RTD
P
P 31
32 RB-1: Pt 100
RB-2: JPt 100 Pt 100 (JIS ’89)
JPt 100 (JIS ’89)
D
D 33
34 RB-3: Pt 50
RB-4: Ni 508.4 Pt 50 Ω (JIS ’81)
Ni 508.4 Ω
P 36 RB-6: Pt 100_97 Pt 100 (JIS ’97, IEC)
14
15 P
P Actual value
Actual value SCLLOW XXXXXX
SCLHIG XXXXXX Input range scaling 0% value
Input range scaling 100% value
Use the same temp. unit as selected in ITEM 21.
19 P Percentage FINZER Fine zero adjustment
Initial status shows actual bias (%). When data is entered, output
(%) is shown.
20 P Percentage FINSPN Fine span adjustment
Initial status shows actual gain (%). When data is entered, output
(%) is shown.
21 P TEMPERATURE SCALE
0
1
2
TMPSCL: [°C]
TMPSCL: [°F]
TMPSCL: [K] Program ITEM 21 first before ITEM 14/15 when °F or K calibra -
tion is needed. This procedure is necessary whenever RTD type is
changed.
REMARK 1 : Temperature is indicated in the unit selected in ITEM 21.
REMARK 2 : Percentage of the input range without zero scaling (0 to upper-range value). See model xJT.
■
POTENTIOMETER INPUT model xJM (Group 01)
4-wire RTD INPUT model 10JRE (Group 01)
ITEM MDFY. DATA INPUT DISPLAY CONTENTS
01 S MAINTENANCE SWITCH (lock command)
0 MTSW: MON.MODE MONITOR mode: data monitoring only
1 MTSW: PRG.MODE PROGRAM mode: “P” marked data modifiable
02 P Alphabets & No. TG: XXXXXXXXXX Tag name entry (10 characters max.)
03
05 P
D
Number (%)
No input
OUTPER XXX.XX
INPPER XXX.XX Output status monitor (%) & simulation output
Input status monitor (%) *
1
10 P LINEARIZATION
41 Pm-1: straight Without
42 Pm-2: curved With (ITEM 60 to 91 for data input) *
2
19 P Percentage FINZER Fine zero adjustment
Initial status shows actual bias (%). When data is entered, output
(%) is shown.
20 P Percentage FINSPN Fine span adjustment
Initial status shows actual gain (%). When data is entered, output
(%) is shown.
REMARK 1 : Percentage of the total resistance
REMARK 2 : See LINEARIZER model xJFX table for detailed explanation on curve data programming (ITEM 60 to 91). You
can also specify output percentage for unused resistance range by the linearization table.