M3LPA2
P. 10 / 10
EM-2657 Rev.3
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
LD1
LD2
LD3
A
A
A
LD1
LD2
LD3
G
LD1
LD2
LD3
G
LD1
LD2
LD3
LD1
LD2
LD3
A
G
LD3
A
LD1
LD2
LD3
R
R
R
G
NORMAL OPERATION (RUN) MODE
ERROR MODE
System Error
Indicates the CPU’s communication error.
DIP SW Error
DIP SW configuration is inappropriate.
Check the DIP SW setting referring to Tables 2 – 11.
PC Configuration RUN Mode (Option A)
The transmitter is configured via PC and
is in normal operating conditions.
DIP SW Configuration RUN Mode
The transmitter is configured via DIP SW and
is in normal operating conditions.
Output Saturated in PC Configuration Mode
(Option A)
The output is saturated.
(approximately below -15% or above +115%)
Output Saturated in DIP SW Configuration Mode
The output is saturated.
(approximately below -15% or above +115%)
Amber LED
Green LED
Red LED
OFF
ON
Blink
A
G
R
STATUS INDICATOR LED
Combinations of the three front LEDs (LD1, LD2, LD3) in
-
dicate the transmitter’s operating status by different flash
-
ing patterns.
Examples are shown below.
10 11 12
7
8
9
4
5
6
1
2
3
106 (4.17)
18 (.71)
110.5 (4.35)
62 (2.44)
[5 (.20)]
• When mounting, no extra space is needed between units.
DIN RAIL
35mm wide
EXTERNAL DIMENSIONS
mm (inch)
