26
JC-IO USERS MANUAL EM-9044-B
4.4.7 B (1-bit)
Figure 12.
Select B
Select B0 to B511.
Right-click to copy
and paste only
when the setting
values are normal.
Possible to paste
the setting values
copied by "Paste
(+1)" with the
effective register
and device number
increased by 1.
B (1-bit) Setting Screen
Table 24. B (1-bit) Setting Parameters
ITEM
DESCRIPTION
Mode
Enable / Disable B register.
Following parameters are configurable when Enable is selected.
CH name / CH comment
Enter the CH name and comment of B register in 32 characters or less.
Data type
Select SHORT / USHORT.
(Use to set manually from web server)
Input
Connection
Select from C0 to C31, L0 to L255, S0 to S255.
Register
Modbus/TCP
When C is selected to Connection and the protocol is set to
Modbus/TCP, set the input register. When the unit identifier
is set to variable, set the unit identification number.
SLMP
When C is selected to Connection and the protocol is set to
SLMP, set the input device.
The display format for device address can be switched
between octal, decimal, and hexadecimal.
Bit position
When L or S is selected to Connection, specify the bit position.
Output
Connection
Select from C0 to C31.
Register
Modbus/TCP
When the protocol of the specified Connection is set to
Modbus/TCP, set the output register. When the unit identifier
is set to variable, set the unit identification number.
SLMP
When the protocol of the specified Connection is set to
SLMP, set the output device.
The display format for device address can be switched
between octal, decimal, and hexadecimal.
Invert
Invert the output when Enable is selected.
