M-Life ML0656, Owner'S Manual

Page: 5 / 68

5
Owner’s manual
EN
3. Insert the 2 x AAA rechargeable batteries supplied, taking not of
the polarity markings inside the battery compartment, then slide
the battery compartment shut.
4. Place the handset on the base to charge. You should let the
batteries charge continuously for at least 24 hours. The batteries
and case may become warm during charging, this is normal.
5. Once fully charged, plug the telephone line cord into the
telephone wall socket.
WARNING
Never use non-rechargeable batteries. Only use the approved
batteries. Using unapproved batteries will invalidate your guarantee
and may damage the telephone.
1.6 Talk / Standby time
Under ideal condition, the handset batteries should give about
10 hours 30 minutes talk time or 160 hours standby on a single
charge (this does not mean you can unplug the base or leave it
for this length of time without charge). Please note that new NiMH
rechargeable batteries do not reach full capacity until they have
been in normal use for several days. Battery low warning.
If the battery icon is flashing in the display and you hear a
warning beep every minute during a call, you will need to recharge
your handset before you can use it.
1.7 Connect the charger(s) and charge the handset(s)
1. Plug the mains power adaptor into the power socket on the
underside of the charger and plug the other end to the mains
power wall socket.