JS-MD 1C Aircraft Flight Manual
MD01-AFM-00-001
Issue: 02
Rev. 00
Rev. Date: 14.09.2017
Page 4–4
Mount tailplane
1. Clean the tailplane pins and bushes
2. Slide the tailplane onto the fin. Take care that the elevators are
sliding into the elevator auto-coupler.
3. Make sure the Mylar edge on the tailplane does not snag on the fin.
4. Screw the tailplane main bolt into position, using the hex socket key
tip of the JS rigging tool.
CAUTION
:
Take care not to over-tighten the tailplane front
attachment bolt. (Hand-tight only, max 1 Nm torque.)