JS-MD 1C Aircraft Flight Manual
MD01-AFM-00-001
Issue: 02
Rev. 00
Rev. Date: 14.09.2017
Page 4–12
6.
Check that the tank vent holes on the left-hand side of the fin are
unobstructed.
7.
Check that the amount of water in the vertical tail fin water ballast
tank is correct in relation to wing water ballast and cockpit load.
8. Check that the horizontal stabilizer is properly installed without free
play.
9. Check that the control surface gap seals are installed and properly
adhered to the stabilizer and fin recesses.
CAUTION
: Blowing into the Pitot, Static, and Total Energy probes may
cause permanent damage to instruments if performed
incorrectly.