11
SA-3 2014
5.2 BATTERY PACK REMOVAL AND REINSTALLATION
1. Turn Hook Lever at the front of Battery Pack
to the left to release Battery Pack.
2. Hold Battery Pack’s Handle and remove it
while pulling it obliquely upward and to the
front.
3. Battery Pack reinstallation is the reverse of
Battery Pack removal.
Firmly push Battery Case from its front and
top sides in order for its connectors to firmly
connect. After Battery Pack is reinstalled,
turn Hook Lever to the right to lock Battery
Pack.
NOTE:
Pay attention to install Battery Pack
in the correct direction. Set Battery
Packs Red Circle Sticker toward
the same Sticker on STAIRMATE
(as shown in the figure).
If Battery Pack is dropped, Battery may be damaged.
Pay attention to safe handling during Battery removal /
reinstallation.
5.3 STAIR GAUGE HANDLING PROCEDURE
1. Detach Stair Gauge from the left side of the
frame. Slide Stair Gauge in the direction
1 shown in the figure at right. Then lift it
upward to (direction 2) to remove it.
CAUTION
11
11
