10
SA-3 2014
5.
DESCRIPTION OF EACH UNIT
5.1 SWITCHES
1. Key Switch
It turns on/off the power supply.
When it is turned clockwise, the power will
be turned off.
NOTE:
when STAIRMATE is not to be used
(to be stored, to be charged, to be
transported), turn of Key Switch,
remove Key and keep it in an
appointed place.
2. UP/DOWN-Switch
Only while this Switch is pressed, does the
machine run. If UP Seesaw is pressed, the
machine will descend.
When the finger is released, Switch will
automatically return its neutral position and
the machine will stop.
3. Emergency Stop Switch
When this Switch is pressed, the machine
will stop immediately. STAIRMATE won’t
restart. Even when the other Switch is
pressed.
To release the emergency stop condition,
turn Emergency Stop Switch in the “arrow”
indicated direction.
.
4. Operation Switch on Driver Unit
When Forward or Reverse Switch top
is pressed, the machine will run in the
corresponding direction. When Switch is
released, Switch will return to its neutral
position and the machine will stop.
NOTE:
This Switch is not t be used for
stair work. Use it only for running
STAIRMATE without Handle Unit.
• If Key Switch is maintained in the ON position, Battery will
more quickly discharge.
When the machine is not to be in use, e sure to turn off Key
Switch and remove it.
• Never attach the objects to Key. Doing so may cause the
objects to be caught by Rubber Crawler.
• Pay attention that the operator’s fi ngers are not caught in a
Rubber Crawler while the operator pushes Operation Switch
on Drive Unit near fl oor level.
CAUTION
10
10
