17
SA-3 2014
6.5 BATTERY REPLACEMENT
1. Unscrew the screw mounting Battery Case
and Cover.
2. Disconnect cables from Battery Terminals, remove exhausted Batteries, and install new ones.
3. Connect cables to Battery Terminals as shown in the figure below. Confirm that cables are pro-
perly connected to the proper terminals. Then apply adhesive agent to Connectors to prevent
their loosening.
While Key Switch is set to ON, power will be supplied from
Battery. If STAIRMATE is not be used, be sure to set Key to
OFF and remove it from Key Switch.
CAUTION
Please regard to official rules and regulations for the disposal of batteries. Batteries are to be
returned to sales operator or official public waste disposal site.
17
17
