34
Setting Up the Revolution 5.1 in WinDVD:
1. Double-click the “Intervideo WinDVD 5” icon that is now located on the Desktop.
2. Look at the transport bar, then click on the SubPanel “arrow” found just to the
right of the InterVideo logo. Select “Audio Mode” from the list.
3. Click on the tool button (it looks like a little wrench), located in the lower right hand
corner. The “Audio” page of the Setup box will then pop up next to the transport.
4. Select the Audio Output. If you are listening to speakers attached to the
Revolution 5.1’s line outputs, then select “Analog.” If you have the digital output
connected to a home theater digital input, then select “S/PDIF.”
5. Set the Audio Speaker Configuration according to how many speakers you are
connecting to the Revolution 5.1’s outputs. Click “OK.”
6. Now the setup is complete. Place a DVD video in your DVD drive and hit “Play.
Revolution 5.1
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
WARNING:
This product contains chemicals, including lead, known to the State of
California to cause cancer, and birth defects or other reproductive harm.
Wash hands
after handling.
© 2006 Avid Technology, Inc. All rights reserved. Product features, specifications,
system requirements and availability are subject to change without notice. Avid,
M-Audio and Revolution 5.1 are either trademarks or registered trademarks of Avid
Technology, Inc. All other trademarks contained herein are the property of their
respective owners.