background image

3. Click the “Install” button. The installation will continue.

4. By default, both options for enabling digital CD audio for CD/DVD drive(s) and

DMA mode for CD/DVD drive(s) are checked.  We recommend that you leave
these settings enabled as they can improve the performance of capable
devices. You may disable them if you know your drives do not support Digital
CD audio or DMA modes. Click “Next” once you have made your choices, and
the installation will continue.

5. Once the installation is complete, you must choose one of the following:

-

Choose to Restart if your Revolution 5.1 card is already installed inside your PC.

-

Choose to Shutdown if you have not yet installed the card, so that you may 
install it safely when the system is completely shut off (this choice is 
recommended when installing the driver prior to hardware installation).

-

Choose “Do not restart or shutdown,” if you wish to complete the Revolution 
installation later.  (Note that your installed Revolution 5.1 card will not function 
properly until after you have restarted your computer.)  

Click “Finish” to exit the installer.

10

Summary of Contents for REVOLUTION 5.1





































Reviews: