Lynx RADIEN DEEP SNOW 2022 Series, Operator'S Manual

Page: 25 / 284

SAFETY INFORMATION 23
BBeeffoorree SSttaarrttiinngg tthhee EEnnggiinnee
1. Remove snow and ice from body including lights,
seat, footrests, controls and instruments.
2. Verify that air silencer prefilter is free of snow.
3. Verify that skis and steering operate freely. Check
corresponding action of skis versus handlebar.
4. Check fuel and injection oil for levels and leaks. Re-
plenish if necessary and in case of any leaks; you
should seek service from an authorized BRP snow-
mobile dealer, repair shop, or person of your own
choosing for maintenance, repair, or replacement.
5. All storage compartments must be properly latched
and they must not contain any heavy or breakable
objects. Hood and side panels must be also properly
latched.
6. Activate the throttle control lever several times to
check that it operates easily and smoothly. It must
return to idle position when released.
7. Activate the brake lever and make sure the brake
fully applies before the brake control lever touches
the handlebar grip. It must fully return when
released.
8. Apply parking brake and check if it operates prop-
erly. Leave parking brake applied.
9. Inspect drive belt condition and height, refer to
DRIVE BELT in MAINTENANCE PROCEDURES .
AAfftteerr EEnnggiinnee iiss SSttaarrtteedd
For proper engine starting procedure, refer to the appro-
priate ENGINE STARTING PROCEDURE .
1. Check headlights high beam and low beam, taillight,
stop light and pilot lamps operation.
N NO OTTEE::
You may need to detach tether cord from your clothes to
check lights. In such a case, attach cord as soon as you
get back at the controls of the snowmobile.
RIDING THE VEHICLE