Lynx RADIEN DEEP SNOW 2022 Series, Operator'S Manual

Page: 123 / 284

121
BBR REEAAKK--IIN N PPEER RIIO OD D
O Oppeerraattiioonn D Duurriinngg BBrreeaakk--IInn
EEnnggiinnee
During the break-in period:
– Avoid prolonged full throttle operation.
– Avoid sustained accelerations.
– Avoid prolonged cruising speeds.
– Avoid engine overheating.
However, brief accelerations and speed variations con-
tribute to a good break-in.
During a predetermined period, the engine management
system controls some engine parameters.
The duration is based on fuel volume. It will take approx-
imately two fuel tanks to complete the break-in.
During this period:
– The engine performance and behavior will not be
optimal.
– The fuel and oil consumption will be higher.
D Drriivvee BBeelltt
A new drive belt requires a break in period of 50 km (30
mi).
During the break-in period:
– Avoid strong acceleration and deceleration.
– Avoid pulling a load.
– Avoid high speed cruising.
If the vehicle creeps, lower the drive belt height from the
preliminary setting. Refer to DRIVE BELT in mainte-
nance procedure .