Lynx P MX 3312 D, Reference Manual

Page: 20 / 30

Reference Manual P MX 3312/3313 D Version1.3
Page 20
SW2 Dip Switch 3
Delete embedded audio . When set to ON this will
delete ALL incoming AES audio signals on the input
SDI signal (if any). When set to OFF only the
channels selected for embedding (using SW2) will
be overwritten. Any remaining audio, which was
present on the incoming SDI signal will pass
transparently.
SW 2 Dip Switch 4
No function here
SW3 Dip Switch 1 through 4
Select Audio Groups . These four switches are used
to select which audio groups are to be embedded
into the incoming SDI video. ON selects the audio
group and OFF deselects it.
Auto Store
If no parameters are changed for 10 seconds then
the current settings will be written into flash memory
automatically, this can be seen by the front LED
flashing yellow four times.