Reference Manual P MX 3312/3313 D Version1.3
Page 19
SW 2
Dip Switch 1
This switch enables local control using the dip-
switches.
ON
enables local control and makes
selections on the dipswitch active, and
OFF
disables local control (locking out any local
changes)
Note.
When Switch 1 is initially switched to
ON
, the static
settings currently set on the dip-switches may not
reflect the actual configuration stored in the
module. This is because all settings can be
changed from the remote control system or via the
Service Adapter. This overrides the local dip
switches regardless of Switch 1 ON/OFF setting. To
ensure the module reads the local dip switch
settings it is recommended to toggle Switch 1
ON-
OFF-ON
before making any local changes to the
dip switches
.
SW2 Dip Switch 2
20 / 24 bit operation
. When set to
ON
the AES audio
output will be 24 bits wide (which is normal). When
set to
OFF
the AES audio output can be set to 20
bits, which is sometimes necessary for downstream
equipment which may not be compatible with 24
bits operation.
Summary of Contents for P MX 3312 D
Page 6: ...Reference Manual P MX 3312 3313 D Version1 3 Page 6 This Page is intentionally left blank...
Page 10: ...Reference Manual P MX 3312 3313 D Version1 3 Page 10 Figure 2 Module Layout...
Page 29: ...Reference Manual P MX 3312 3313 D Version1 3 Page 29 This Page is intentionally left blank...
Page 30: ...Reference Manual P MX 3312 3313 D Version1 3 Page 30 Notes...
