Lynx P MX 3312 D, Reference Manual

Page: 22 / 30

Reference Manual P MX 3312/3313 D Version1.3
Page 22
Alarm/LED Status Indicators
The P MX 3312/3313 D module has built in LED
indicators, which serve as alarm and status
indication for the module. Function is described
below. The Indicators are found on the bottom of
the module and can be seen through the access
holes provided. (Figure 2)
Digital Channel Condition Indicator
4 channel Status LEDs (LED 1..4) are provided on
the module edge and can be seen through the
access holes (figures 2 ). One LED is provided for
each audio group, which is three color, and has
several indication states.
*Note
When working in 525 mode with 24 Bit audio
selected then only the first three groups can be
embedded. Group 4 is locked. In 525 mode with
20-bit audio all four groups are accessible.
LED
Color Indication
Off No audio present on SDI I/P and none inserted
Green No audio present on SDI I/P and audio is inserted
Green short
blink Audio present on SDI input (AES1, AES2 or both)
and being deleted
Green flashing Audio group present on SDI input, and is being
overwritten by the embedder
More than one
Yellow LED on User error. More than one group is selected.
All LEDS
Yellow User error. Locked * audio group 4 has been
selected
Red Group selected for embedding, but no AES is
present, or audio is not synchronous with video (if
sample rate converter is deactivated)