Multi-room Music System
23
Schematics for Receiving Angle of Infrared Remote Controller
※
Fabrication of Wired Remote Controller Wires
The host is connected to wired remote controller via twisted pair. The fabrication of the
connection wires is as shown below.
Note: For the operation of the wired remote controller, please refer to the Operating Instructions for
HS-80R (Wired Remote Controller).
Note: The infrared remote controller is only valid for
zone 1 when it is directly used for operating the host
device. When using the “SOURCE” key on infrared
remote controller to select the audio source for zone 1,
it is available to select “5.1Line” and “OPTICAL”. But
on the remote controller, no direct selection keys are
provided for these two sources.
The range of receiving angle for the host device is 90°.
The range of receiving angle for
wired remote controller is 90°.
The ports on two ends shall
match one by one.
Remote controller
port to the host
device
Connected to Wired
Remote
Controller
P3 Socket
Summary of Contents for HS-6818
Page 32: ...http www lyintlcorp com ...
