LY International Electronics HS-6818, User Manual

Page: 21 / 32

Multi-room Music System
19
defaulted, and the “STOP” indicates that the TUNER program will be stopped upon
arrival of the timer point.
 For frequency selection, there are 40 options respectively for AM band and FM band. The
serial number represents the storage number of radio frequency. For manual operation of
TUNER, the radio frequency received has been saved in the storage number. During timer
setting, we have just loaded the radio frequency saved during manual operation.
 After completion, press “Confirm" to confirm the setting and exit.
6.1.9 Zone Setting
Rotate the digital wheel to move the cursor to “ZONE TIMER SET" option. then, press the digital
wheel to enter the zone timer setting interface (Fig. 6-1-5). Under this mode, you can select a zone
and set the volume, program and ringer of this zone.
 Zone Selection: Rotate the digital wheel to move the cursor to the number pane behind the
"Zone” option and then press the digital wheel once, so that the icon will appear behind
the pane. Then, rotate the digital wheel to select. After that, press the digital wheel once to
confirm and exit.

Volume Adjustment: For this operation, please refer to the description of Volume
Adjustment under zone control.

Program Selection: Select the audio source allocated this zone by using the method for
selecting the zone as above. The symbol “…” indicates default setting, and “OFF”
indicates that this zone will close the previous programs upon arrival of the timer point.
The zone 1 of this system is provided with 8 audio sources, and the other zones are
provided with 6 audio sources. The audio sources “5.1Line and “Optical” in zone 1 are
not subject to timer control. You may select one audio source at the same time for all
the zones, or select different audio sources. If the MP3 or tuner is playing the program
before arrival of the timer point, but there is no setting to MP3 or tuner at the timer point,
then the MP3 and TUNER will maintain the play state before.

Ringer Setting: This operation is used for setting the ON/OFF state of ringer at the timer
point. Rotate the digital wheel to move the cursor to the pane behind the “RINGER”. Then,
rotate the digital wheel to select. After that, press the digital wheel once to confirm the
selection and exit.

Default: If set to default, this zone will keep the state prior to arrival of timer point.

After setting, press “Confirm” once to confirm the above operations and exit the zone timer
setting interface. Then, return to the timer setting interface.
Note: One timer point can control all the zones. For example, after setting of zone 1 at a
time point, you may continue to repeat the above operations under this interface to
set the other zones without pressing “Confirm”.
6.1.10 Delete: What is deleted in this operation is a specific timer point at present.
ZONE TIMER SET
DEFAULT
MP3
ZONE
02
VOL.
ON
OK
SOUR. CHIME
(Fig. 6-1-5)
TUNER TIMER SET
OK
01
BAND
FM
CANCEL
CH
(Fig. 6-1-4)