LY International Electronics HS-6818, User Manual

Page: 14 / 32

Multi-room Music System
12
 Volume / Tone Control There are two ways for controlling the volume and tone:
①
From zone control interface, you may rotate the digital wheel * to move the cursor to the
sliding pane behind the "Volume" option. Press the digital wheel # once, so that the icon
will appear behind the pane. Then, rotate the digital wheel * clockwise or counterclockwise
to move the slider left and right, so that the zone volume will be increased or decreased
accordingly. Adjust the treble or bass tone in the same way.
②
Use the wired remote controller or infrared remote controller to control the zone volume /
tone under the interface except “Operation Option”. For control of the zone volume / tone
from wired remote controller, please refer to the Operating Instructions for HS-80R (Wired
Remote Controller).

Ringer Testing Rotate the digital wheel * to move the cursor to “Ringer Testing” option and
press the digital wheel # once, so that a set of ringers will be output from the output port.
(Note: The remote controller does not provide the “Ringer Testing” function)

After completion of the above operations, rotate the digital wheel * to move the cursor to
“CONFIRM” checkbox. Then, press the digital wheel # once to confirm and exit. The other
zones from zone 2 to 12 may be controlled according to the method above.
3
．
Operating Instructions for Manual Control of Zone 1
Zone 1 is different from other zones. Except the 6 audio sources in other zones, the zone 1 also
has 5.1 channel and optical input source, totaled 8 types of audio sources for selection. Meanwhile,
it differs from other zones in view of zone output mode ad tone / volume control. The detailed
operations are as follows:
Under the main interface, rotate the digital wheel * to move the cursor to zone 1 state pane (Fig.
3-1). Then, press the digital wheel # once to enter the zone 1 control (hall control) interface (Fig.
3-2).
1) Select Audio Source The selection of audio source for zone 1 is same as that for other
zones. The only difference is that the zone 1 has two more options, i.e. 5.1 channel (5.1LINE)
and optical (OPTICAL) source. Except that the 5.1 channel (5.1LINE) and optical (OPTICAL)
can be manually selected from the host panel, they can also be selected by pressing the
/ SOURCE - on infrared remote controller.
2) Total Volume / Tone Rotate the digital wheel * to move the cursor to “Total Volume/Tone”
(Fig. 2-1) (Fig. 2-2)
ZONE 02 CONTROL
DVD SOUR.
VOL.
BASS
TREB.
OK CHIME TE.
(Fig. 3-1)
(Fig. 3-2
）
HALL CONTROL
DVD SOUR.
VOL.& TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP OK
Press digital wheel
Or press
Press digital wheel
Or press
DVD TUNER
PC
TV
MP3
PC 1 2 3
4 5 6
DVD
TUNER
PC TV MP3
PC
1 2 3
4 5 6