Multi-room Music System
16
effect is best set to STEREO mode from the "Listening Mode” of “Hall Sound Field Mode Setting".
5.1 Band Selection
From the panel, you may press the BAND key under the screen to switch between AM and FM.
You may use the band switching key on the wired remote controller and infrared remote controller
to switch between AM and FM. The frequency range of AM band is 522kHz-1620kHz; and the
frequency range of FM band is 87.00MHz-108.00MHz.
5.2 Search Radio
From the panel, you may press the “
“ and "
“ key under the screen to search the
radio storage number forward or backward and load the saved radio. You may also search the
radio by rotating the digital wheel. Rotate the digital wheel clockwise to search toward the high
band, with slow rotation of the digital wheel for one grid to increase the frequency by one step
(One step is 50kHz for FM band and 9kHz for AM band). When searching the radio station, the
black message indication bar as shown in Fig. 5-1 will be displayed behind "Signal” option. The
indication bar will be become wider if the signal is strong, and will become narrow if the signal is
weak. Quick rotation of the digital wheel for one turn can enter the auto search state. It will be
stopped when searching the radio frequency or reaching the highest band. Rotate the digital wheel
counterclockwise to search toward the low band, with slow rotation of the digital wheel for one grid
to decrease the frequency by one step (One step is 50kHz for FM band and 9kHz for AM band).
The signal display and auto search are same as above. You may also use the key
on the panel to search the radio frequency automatically.
5. 3 Store Radio
The radio frequencies, no matter searched manually or automatically, can be stored into 40 radio
storage numbers by pressing MEMO key in combination with the key
or
. When
storing the radio, the storage number behind the “Storage” option on screen will blink with the first
press of “MEMO” key. After adjusting the storage number properly with
or
key, you can
press “MEMO” key again to store the searched radio frequency to the current storage number.
5. 4 Mute Mode
By pressing
“
” key on the panel, the icon
on the screen will change to
(Fig. 5-2),
indicating that the radio is set to mute mode. Press
again to return to voice state. Upon
arrival of the timer point, the setting for the timer point will be executed.
5.5 Load Radio Frequency
In the timer point, you may load the stored radio frequency. For the operating methods,
please refer to the instructions for setting of timer point.
You may use wired remote controller and infrared remote controller to load the stored radio
(Fig. 5-2)
BAND FM
100.45
MHz
SIGN
STEREO
AM/FM PLAYER
CH 40
Tuner Mute Mode
Summary of Contents for HS-6818
Page 32: ...http www lyintlcorp com ...
