LY International Electronics HS-6818, User Manual

Page: 7 / 32

Multi-room Music System
2
page 5).
2) Tuner Mode (Page 5)
The tuner function is realized in form of
modular design, and can be separated
from the host for installation at a
position with better receiving effect. The
module is connected to the host via
T568A network cable.
3) Tuner Module Port (TUNER INPUT)
For connecting the tuner module signal.
4) DVD/TV Video Input Port (VIDEO
INPUT DVD) Page 5
5) Wired Remote Controller Port for Zone
1 ~ 12
(REMOTE INPUT) Page 8 and 9
6) Zone 1 PA Output Port (ZONE1
SPEAKER OUTPUT) (Page 7)
7) Zone 2/Zone 3 PA Output Port (Page 9)
(ZONE2/ZONE3 SPEAKER OUTPUT)
8) AC220V Timer Power Output Socket
(TIMER)
The switching state of timer power
output socket is interlinked to the switch
of zone. You may switch on any of the
zones to switch on this power output.
This power output is switched off when
all the zones are switched off. Timer
control over its switching state is
provided. (Page 15)
9) RS232 Port (RS232)
RS232 remote control port is provided,
so that the user may control the
functions of this device via central
control equipment.
10) Remote Control Output Port (REMOTE
OUT) Page 7
Connected to infrared receiver for
infrared learning of the function controls
over external DVD and TV.
11) 5.1 Channel Input Port for Zone 1 (5.1
INPUT)
For connection and description, please
refer to the Connection Instructions (on
page 5).
12) DVD/PC/TV/AUX Audio Input Port
13) Line Signal Output Port for Zone 1 /
Zone 2
14) 5.1 Channel Sub Woofer Output for
Zone 1
(SUB WOOFER) (Page 7)
This signal has no PA and it is output
via line directly.
15) Zone 1 ~ 12 Video Output Port (Page 8)
For transmitting the DVD/TV video
signals to 12 zones, with its distribution
changing synchronously with the audio
signal.
16) Zone 4 ~ 12 PA Output Port (Page 9)
17) AC220V Working Power Input