LY International Electronics HS-6818, User Manual

Page: 16 / 32

Multi-room Music System
14
The hall independent volume control refers to independent control over the volume of several
channels, e.g. front and surround. The operation is same as that for zone volume control. It may
be done by using digital wheel or by using the keys and .
5
）
Mode Setting Rotate the digital wheel * to move the cursor to “Mode Setting” option and
press the digital wheel # once to enter the “Mode Setting” interface (Fig. 3-6).

Listening Mode: Three options are provided, namely: AUTO, Dolby Pro Logic and STEREO.
Rotate the digital wheel to move the cursor to the pane behind "Listening Mode”, and press
the digital wheel. When the icon appears in pane, rotate the digital wheel to adjust the
option. Select the desired option and press the digital wheel again to confirm. The effect
under three modes is respectively:
①
STEREO: Forcibly there is output from the speakers on front left and front right only, but no
signal output from other channels. It is effective for all program types.
②
AUTO
：
Auto mode. If the input is Dolby digital AC-3, the listening mode will be AC-3
DIGITAL. If the input is DTS, the listening mode will be DTS DIGITAL.
③
Dolby Pro Logia: Dolby Pro Logic processing mode, which can process the stereo
(dual-channel) movie and music of any quality into surround output with 5 full-range
channels.

DSP Effect: Operate as above by using the digital wheel. Its function is to simulate the effect
of different fields from internal DSP, including: HALL, CHURCH, DISCO, THEATER, LIVE,
MOVIE, MUSIC and SIMULATE.
①
HALL
：
Simulate the hall effect.
②
CHURCH
：
Simulate the church effect.
③
DISCO
：
Simulate the disco hall effect.
④
THEATER
：
Simulate the theater effect.
⑤
LIVE
：
Simulate the live effect.
⑥
MOVIE
：
Simulate the cinema effect.
⑦
MUSIC
：
Simulate the music hall effect.

After setting, select “Confirm" and press the digital wheel to confirm the setting and exit the
setting interface.
Notes:
The 5.1 channel input and output have corresponding through mode. Therefore, when you
have selected the program of 5.1 channel source in zone 1,
The “Speaker Setting” option will be disabled;
①
The “Mode Setting” option will be disabled.
②
HALL CONTROL
DVD SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP OK
(Fig. 3-2)
(Fig. 3-6)
HALL SOUND FIELD MODE
LISTEN MODE
LIVE DSP EFFECT
OK
AUTO
Press digital wheel
Or press