Rev #
23
Version 7.10
December
2019
Use
Show glider range area
to display
the
reachable area from
the
current altitude with
current wind and MacCready settings.
Use
area colour
and
area border
to define its
properties.
The a
rea can be filled outside or inside.
Glide ratio
defines the past flown average
efficiency which will be used for
the
average efficiency calculation for
the
glider range area.
Fill area
can be outside or inside the range area.
Press the
DEFAULT
button to reset these settings back to default
.
5.1.6.6
Thermal Mode
When entering a
thermal
the
display unit can enter
a
special page, which is called
the
thermal page. See C
LX Styler manual for
how
to define
the
thermal page.
Check
Enabled
to
enable
the
thermal page option.
The d
isplayed path on
the
thermal page
can be different from the one defined in Glider and track dialogue
.
Use
the
length
,
line
and
colouring
properties to define
the path d
isplay.
Also,
page zoom is different and set to
a
fixed value defined with
the
Page zoom
property.
Switching to thermal mode can be
done in
2 ways: Circling detection or Switching SC/Var.
I
f you
start circling the thermal
mode will become active at the angle of turn (set switch angle), or if you
swit
ch from SC to
Vario mode.
Circles are coloured based on
THE
following methods: Auto span, MC or
Average Vario.
