LXNAV LX80 Series User Manual Download Page 111

Page: 111 / 224

Rev #

Version 7.10

December

2019

Once

the spe

ed range is entered, the system will be able to display

suggested flap position

based on current wing loading and g

factor.

5.1.13

Profiles and Pilots

All settings and navigational page layouts are stored in a profile. Profiles can be used in

different ways:

•

For club operation or multiple pilots sharing the same glider. Each pilot can have his

personal profile.

•

When the user is flying a glider,

which can have a different wing

span

. In this situation

the pilot has two profiles, one for each configuration.

•

When

a pilot is flying in several different locations. A separate profile for each location

can be created (examples: France, Spain, Namibia, WGC2014).

Profile consists of two parts:

•

Navigational page layout

defines which navboxes and symbols are visible on

navigational page.

It defines colour of navboxes, font sizes and colours, how many

navigational pages are visible and which modes are enabled.

Navigation page layout

can be setup with LX Styler or on device itself (See C

hapter

6).

•

Device settings

includes glider polar, selected databases, selected airspace and

waypoints file, map colours, vario indicator settings and flight computer properties.

Device settings can be modified on

the

device itself through

the set

up menu (

see

hapter

5.1) or with LX

Styler.

An active profile is selected when

the system

is powered on (see Chapter 7.1.2).

Summary of Contents for LX80 Series

































































































































































































































Search results

Summary of Contents for LX80 Series

Reviews:

Brands by name

Popular brands

LXNAV LX80 Series, User Manual

Search results

Summary of Contents for LX80 Series

Reviews:

Brands by name

Popular brands