LXNAV LX80 Series, User Manual, Page: 125 / 224

Rev # 23 Version 7.10 December 2019
•
55556 will enable Condor simulator input via the PC port.
•
02000 toggle support for USB AHRS module.
•
43001 toggle 485bus logger.
•
44440 enter continuous grab mode.
•
01044 enable or disable automatic auto zero of speed sensor at end of flight.
•
33333 reset recorded min/max temperature.
•
89892
device firmware update
•
41000
first or forced update of FLARM .
•
42001
Flarm reset
•
33400 shows menu with all above passwords
5.1.17 Admin Mode
Admin mode is very powe rful tool to disable functionality of the system for normal users. It
is designed for club usage where one person is taking care of all instruments.
To enable Administration mode, check the Enable admin mode box. The n ext step is to
enter and re-enter the administration password. Once the password is entered it is possible
to define which actions a normal user can perform . Use single layout will use Graphical
LAYOUT (navboxes etc) settings only from the selected active profile. If you will
change/activat e any other pr ofile, settings – layout will remain from the active one.
There are several actions, which can be disabled for normal user:
•
Change Safety Altitude
, user will not be able to set the safety altitude.
•
Change Report Point
, user will not be able to set report point, if i t is already set.
•
Change Wind Methods
, user will not be able to change methods for wind
calculation .
•
Change Page Style
, it is not possible to change page layout .
•
Change Flarm Target
, user cannot change FLARM targets names and other data
for it.
•
Use Flight Recorder menu
, user cannot modify flight recorder properties.
•
Use Display menu
, user cannot modify display properties.
•
Use Files and Transfer menu
, it is not possible to use the entire files and transfer
menu.
•
Select Airspace file , user can not select and modify airspaces at all.
•
Modify Airspace
, user can select different airspace file, but he cannot edit or delete
it.
•
Select Airport file , user cannot select and modify airports.
•
Select Waypoints file , user cannot select and modify waypoint files.
•
Modify Waypoints , user can select, but cannot delete, waypoint file.
•
Select Raster maps , user cannot select and modify scanned maps.