Rev #
23
Version 7.10
December
2019
Page
49
of 224
5.1.5.7.2.1
CITv2-install Procedure
If CITv2 is not preinstalled then you will need to verify that enough free space is available
on your device before installing CITv2 maps.
Installation on your device is as follows:
1. Verify that you have en
o
ugh available free space on internal memory by going to Setup
-
>Password and enter 00111. Verify that "FreeMem CF" value displayed is at least 3.8
GBytes.
2. Download CIT files from:
https://my.pcloud.com/publink/show?code=kZiiy0ZzEanvinK8pQ0dYferQPHo4Htxu7V
These files will also be automatically verified while being copied to your device. To prevent
discovering a faulty download “on site” you can (optionally) ve
r
ify downloaded files on your
PC using a tool like HashCheck
http://code.kliu.org/hashcheck/
After installing HashCheck you can double click on the checksums.md5 file to automatically
trigger verification of
downloaded CIT files.
Verification of Downloaded Files with the HashCheck Tool
3. Copy the downloaded CIT files to USB or SD and use "Safely remove hardware or eject
media" (
very important!
) before removing the SD or USB from the PC. This step preven
ts
accidental removal of the media before files are fully written to it. Removal while files are
being written would result in corrupted files on the media.
4. Install the latest version of the firmware on your device.
5. With the SD/USB containing CIT files inserted into your device go to Setup
->Password
and enter 00112. You will now be asked "Map (CIT) file(s) have been detected on external
media. Would you like to copy them to internal memory?" Press "Yes".