LXE Akerstroms Tx700, Configuration Manual

Page: 11 / 146

E-EQ-TRUXCONFIG-D-ARC 11
2 Installation
2.1 Personal safety
The TX700 User’s Guide and the Tx800 User’s Guide contain important cautions and warnings for
installation and operation of the Trux computer. Please refer to the appropriate manual to review these
cautions and warnings.
2.2 Product safety
2.2.1 Supplying power
Please refer to the “Electrical Installation” section for proper power supply connection. This section can
be found later in this manual as well as in the Tx700 and Tx800 User’s Guides.
2.2.2 Humidity, moisture, cold and heat
Make sure the operating environment is within the standards described in the Tx700 User’s Guide or the
Tx800 User’s Guide.
2.2.3 Interference
Ensure that:
•
Any nearby electrical cabling is run so that interference does not occur.
•
The immediate environment meets requirements stated in the specified standards in the User’s
Guide regarding interference
2.2.4 Vibrations
The Trux computer should be mounted in a way that vibrations do not exceed the limits it is designed for
(see Tx700 User’s Guide or Tx800 User’s Guide).
2.3 Typical usage
Typical usage areas for Trux computers include:
•
Mounted in forklifts, operating in warehouses connected to a logistic system via a wireless
network,.
•
In trucks using global positioning system (GPS) navigation, routes, maps, and picking lists.
•
In forestry machines using GPS-navigation, maps and felling instructions.